iFixit finds Apple HomeView difficult to disassemble and repair
iFixit’s teardown found that Apple HomeView uses extensive glue and adhesive to secure the display, speakers, antennas, and logic board. One speaker broke during removal, and considerable force was needed to separate the logic board from the chassis. In the tabletop model, separating the display from the base requires specialized tools or potentially destructive disassembly; its USB-C port is modular and relatively accessible. The wall-mounted model has smaller internal speakers, while the tabletop model’s woofer is connected by an extremely short cable that complicates reassembly.
The teardown documents significant repairability limitations in Apple’s first smart-home hub, including adhesive-secured components, damage during disassembly and difficult reassembly. The two reports rely on the same iFixit inspection and do not provide independent testing.

iFixit’s teardown of the new Apple HomeView is now up, revealing a device that seems nearly impossible to take apart and repair. Watch it below.
iFixit tears Apple HomeView apart in more ways than one
Following last week’s launch of the Apple HomeView, iFixit today published its teardown of the device.
Contrary to recent teardowns, which found significant repairability improvements with greater component modularity and easier access to internal components, the HomeView put up a fight nearly all the way through.
With heavily glued or adhesive-bonded components, including the display, speakers, antennas, and logic board, the teardown proved particularly challenging, even after the adhesive securing the display’s speakers was soaked in isopropyl alcohol.